loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 239567
Badenian II d
German Reichsbahn class 144
Germany | 1902 | 18 produced
No. 747 when delivered in 1905
No. 747 when delivered in 1905
works photo MBG Karlsruhe

In view of the increasing loads in express train service around the turn of the century, the Grand Duchy of Baden State Railways launched a tender for a heavy express locomotive, in which seven designs took part. The requirement was to transport trains weighing 200 tonnes up gradients of 0.33 percent at a speed of 100 km/h. The contract went to Maffei, which also later developed the express trains for Baden.

In 1902, at the time of delivery, they were the largest of their kind in Europe with an operating weight of around 75 tonnes, which rested on a chassis with the axle configuration 4-4-2 (Atlantic). They were powered by a saturated compound engine, the four cylinders of which all acted on the first coupled axle. In contrast to the later Maffei express locomotives, the frame was not yet designed as a bar construction, but as a plate frame, as was usual at the time. Due to the elongated firebox, the distance between the rear coupled axle and the trailing axle was very large. The latter was designed as an Adam's axle, since the ash pan would not have allowed space for a drawbar.

Due to the long wheelbase and a large driving wheel diameter of 2,100 mm, the locomotives were remarkably smooth running right from the start. During test runs in 1904 with a train of four cars, top and average speeds of 144 and 116 km/h were reached. The first was broken three years later by the Bavarian S 2/6, which was also a Maffei design, but unlike the II d it was only developed as a one-off for test purposes.

The first production batch of twelve engines was manufactured by Maffei and delivered in 1902, another came in 1905 from the Karlsruhe mechanical engineering company and comprised six units. After the First World War, a total of ten engines had to be handed over to France. This left only seven units, as one engine had to be scrapped as early as 1903 due to an accident. The locomotives that remained in Germany were still intended to be redesignated as class 144, but they could not expect a long life due to their only two coupled axles and were therefore retired in 1925. The now French locomotives remained in service for another nine years.

General
Built1902, 1905
ManufacturerMaffei, MBG Karlsruhe
Axle config4-4-2 (Atlantic) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length68 ft 7 1/16 in
Wheelbase34 ft 2 1/4 in
Fixed wheelbase7 ft 2 5/8 in
Empty weight147,269 lbs
Service weight166,890 lbs
Adhesive weight73,414 lbs
Axle load36,817 lbs
Water capacity5,283 us gal
Fuel capacity13,228 lbs (coal)
Power
Power sourcesteam
Estimated power1,207 hp (900 kW)
Optimal speed51 mph
Top speed68 mph
Starting effort15,061 lbf
with start valve18,073 lbf
Power Plant
Driver diameter82.7 in
Boiler pressure232 psi
Expansion typecompound
Cylindersfour, HP: 13 3/16 x 24 7/16 in
and LP: 22 7/16 x 24 7/16 in
Boiler
Grate area41.7 sq ft
Firebox area146.6 sq ft
Tube heating area2,114.9 sq ft
Evaporative heating area2,261.5 sq ft
Total heating area2,261.5 sq ft
Calculated Values
steam locomotive
express
Von Borries compound
last changed: 01/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language