loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 436861
London & North Western Precedent class
Great Britain | 1874 | 70 produced
No. 867 “Disraeli”
No. 867 “Disraeli”
flickr/stratfordman72

The LNWR Precedent class consisted of 70 2-4-0 express locomotives with a driver diameter of 6 ft 6 in or 1,981 mm, built between 1874 and 1882. As usual, they had inside cylinders with a common steam chest. Francis Webb designed them so well that they could reach more than 50 mph with a total train weight of 200 tons on trial runs. In service, they could haul ten carriages with a speed of 45 mph

Between 1891 and 1901, 62 of the 70 locomotives were replaced by new locomotives of the “Improved Precedent” class which got the same numbers and names. The remaining eight were rebuilt into the same class, but retained the thinner frames and more parts. Of these rebuilt locomotives, four survived until the 1923 grouping and got the LMS numbers 5000 to 5003. They were withdrawn between 1929 and 1934.

General
Built1874-1882
ManufacturerCrewe
Axle config2-4-0 (Porter) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase15 ft 8 in
Rigid wheelbase8 ft 3 in
Service weight73,360 lbs
Adhesive weight49,720 lbs
Total weight129,360 lbs
Axle load25,760 lbs
Water capacity2,162 us gal
Fuel capacity8,960 lbs (coal)
Boiler
Grate area17.1 sq ft
Firebox area103.5 sq ft
Tube heating area980.5 sq ft
Evaporative heating area1,084 sq ft
Total heating area1,084 sq ft
Power Plant
Driver diameter79 in
Boiler pressure140 psi
Expansion typesimple
Cylinderstwo, 17 x 24 in
Power
Power sourcesteam
Estimated power350 hp (261 kW)
Optimal speed21 mph
Starting effort10,448 lbf
Calculated Values
steam locomotive
express
Francis William Webb
last changed: 06/2024
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language